Aperion Audio Two (2) Towers / Gloss Black Verus V8T 8 Inch
Verus V8T Tower Speakers | 3-Way Design | 8" Woofers | Tower Speakers We are introducing the APERION® flagship Verus III Concert V8T Tower Speakers. After 21 years of nonstop engineering development and countless hours toiling in the lab, we proudly announce one of the best floor-standing tower speakers in the world. The Verus V8T Tower Speakers, a large-scale, three-way speaker featuring dual 8" woofers, dual 5.25" midrange woofers, our Axially Stabilized Verus Tweeter, and a premium crossover network, our Verus Concert Tower unveil the peak of Aperion Audio engineering. Truly a concert-like experience, we ensured the performance of this speaker will shine an invisible light of happiness and wisdom with our customers as proof to understanding the value of the Aperion Audio's brand. We stand for the best in customer service, product build and sound quality. So here's a huge thank you to all of our customers who have allowed us to bring audio happiness to your homes for 21+ years. Here's to many more. Specification Frequency Response: (+/- 3dB) 26-35,000 Hz Impedance: 4 Ohms Sensitivity: 91 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: 1.1" Custom Aperion ASR Tweeter with ferrofluid Midrange: Two 5.25" Woven Kevlar Mid-range Drivers with Aluminum Phase Plugs Woofer: Two 8" Woven Kevlar Woofers with PVC Dust Cap and Rubber Surrounds Driver Configuration: 3-Way Design Enclosure Type: Anti-Resonant, Internally Braced, Dual Rear Ported Product Weight: 77 Lbs / 35 Kg Product Dimensions: W 11" x H 51" x D 14" W 269mm x H 1287mm x D 350mm Placement Location: Front L/R Floor standing Speaker Spike Thread: Thread Size: M8 ; Thread Spacing:1.25 mm Shipping Weight: 98 Lbs / 44.3 Kg Shipping Dimensions: L 20" x W 17" x H 58.5" L 510mm x W 430mm x H 1485mm Features Patented 1.1" ASR Tweeter Our design objectives required a tweeter that permits a lower crossover frequency in order to unburden the midrange cones above 2.6 kHz, where they tend to beam. To address this conundrum, we went to the drawing board with the goal of developing a tweeter with a diaphragm that resists “rocking” near its resonant frequency. By pinning the diaphragm’s center in a plane above the voice coil, it became “axially stabilized,” which minimizes unwanted distortion. The silk dome is coated in a specially developed damping compound to ensure a smooth and accurate response with controlled resonance. The refined "wishbone" waveguide has resulted in better output, with more uniform frequency response and wider dispersion across its operating range. The ferrofluid cooled voice-coil is driven by a high-energy ferrite magnet motor. 5.25" Kevlar Midrange Drivers With Aluminum Phase Plug All woofers in the Verus family employ Kevlar cones. With the crossover point starting at about 300 Hz, this exceptionally rigid Kevlar material allows for a warm, clean and dynamic response. This is driven by a high-performance ferrite magnet structure with a vented pole piece to reduce heat build-up and larger T-yoke for increased excursion to increase bass response. The aluminum phase plug and extended voice coil increases power handling to ensure they perform to the max. These midrange "bullet drivers" provide an extraordinary level of detail contributing to the Verus V8T Tower Speakers full-color palette of sound. Custom 8" Kevlar Long Throw Woofers The dual 8" Kevlar woofers provide intense punch with a long-throw linear excursion design. These anchor the bottom end of the 3-way crossover network to provide a tight, clean and accurate low-bass response. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers have also resulted in a cleaner, more open sound in the transition regions. The Verus III employs superior customized components, which include high quality thin film capacitors to provide minimum dielectric loss, customized Aperion internal wiring with spade connectors to make upgrading a breeze, and we even went as far as customizing the PCB board with an Aperion red color to represent our love of great sounding audio! Level Adjustment For the midrange and tweeter we have chosen a crossover that has a fast transient response and a minimum of phase shifting. The connectors are of a bi-wiring type so that you can connect to the amplifier with double cables (bi-wiring), or connect to one or two amplifiers to further improve the sound. Optional Port Plugs Optional port plugs are included with the Verus V8T Tower Speakers. If the speakers are placed close to a wall or they sound "boomy" in your room, one or both of the foam plugs may used to control the bass response. Furniture-Grade Finish The slim curves of...
| Brand | Aperion Audio |
| Model | Two (2) Towers / Gloss Black Verus V8T 8 Inch |
| Drivers | |
| Woofer | Two 8" Woven Kevlar Woofers with PVC Dust Cap and Rubber Surrounds |
| Woofer diameter (mm) | 203 |
| Midrange | Two 5.25" Woven Kevlar Mid-range Drivers with Aluminum Phase Plugs |
| Midrange diameter (mm) | 133 |
| Tweeter | 1.1" Custom Aperion ASR Tweeter with ferrofluid |
| Tweeter diameter (mm) | 28 |
| Frequency response | 26 Hz – 35000 Hz +3 −3 dB |
| Enclosure | Ported |
| Sensitivity (dB) | 91 |
| Impedance (Ω) | 4 |
| Recommended amplifier power, least (W) | |
| Recommended amplifier power, most (W) | |
| Built-in amplifier power (W) | |
| Height (mm) | 1287 |
| Width (mm) | 269 |
| Depth (mm) | 350 |
| Weight (kg) | 35 |