Aperion Audio A-Stock Verus V6T 6.5" Tower Speaker Single (Open Box)
A-Stock Note: This listing has four (4) speakers available at 25% off each speaker due to light surface scratches that are too fine to photograph, mainly where the feet attach to the speaker cabinet. These speakers were used in our demo room and various locations for sound demos. Overall condition is fantastic! Everything has been thoroughly inspected and tested just for you! Enjoy peace of mind with our 5-year warranty and lifetime customer service! Serial number: V6T100001Y, V6T100018Y Package: New box Accessories: magnetic grilles, binding post jumpers, treble mod Special Price: 25% Off retail price If you want the price of your speaker to be as real as the experience it creates, then you're the reason we designed the APERION® Verus III Grand Tower. We've handled the engineering and economics, which means you’ll pay thousands less for sound that lands you and your family in the middle of the action. You're not just watching a car chase - you're careening around a corner, engine rumbling, tires squealing, pulse racing. You're not simply listening to the blues - you're sitting in a roadhouse in Mississippi, hearing the guitarists fingers slide on the strings. To ensure a true-to-life experience from one end of the spectrum to the other, we combined the Verus III Grand Tower's four proprietary woven Kevlar® woofers and midrange drivers with our patented Axially Stabilized Radiator™ V2 silk dome tweeter. This blissful match recreates movie audio and music just as the artists intended, for pure, powerful waves of sound. Whether you're building a music system that takes you to dreamland or a home theater that rivals the multiplex, the Verus III Grand Tower forms the foundation of performances so immersive that you become part of the show. And even when your ears are taking a break, your eyes will delight in the Verus III Grand Tower's striking good looks that’ll make you want to fire them up again. Specification Frequency Response: (+/- 3dB) 30-35,000 Hz Impedance: 4 Ohms Sensitivity: 89 dB Recommended Power: 20-200 Watts Peak Power: 400 Watts Tweeter: 1.1" Custom Aperion ASR Tweeter with ferrofluid Midrange: Two 5.25" Woven Kevlar Mid-range Drivers with Aluminum Phase Plugs Woofer: Two 6.5" Woven Kevlar Woofers with PVC Dust Cap and Rubber Surrounds Driver Configuration: 3-Way Enclosure Type: Anti-Resonant, Internally Braced, Dual Rear Ported Product Weight: 59 lbs/27 Kg Product Dimensions: 43.5" H x 8" W x 12" D/1105mm H x 203mm W x 305mm D Spike Thread: Thread Size: M8 ; Thread Spacing:1.25 mm Placement Location: Front Floorstanding Speaker Shipping Weight: 75 lbs/34 Kg Shipping Dimensions: 18" x 14" x 50"/ 460mm x 365mm x 1280mm (LxWxH) Features Patented 1.1" ASR Tweeter Our design objectives required a tweeter that permits a lower crossover frequency in order to unburden the midrange cones above 2.6 kHz, where they tend to beam. To address this conundrum, we went to the drawing board with the goal of developing a tweeter with a diaphragm that resists “rocking” near its resonant frequency. By pinning the diaphragm’s center in a plane above the voice coil, it became “axially stabilized,” which minimizes unwanted distortion. The silk dome is coated in a specially developed damping compound to ensure a smooth and accurate response with controlled resonance. The refined "wishbone" waveguide has resulted in better output, with more uniform frequency response and wider dispersion across its operating range. The ferrofluid cooled voice-coil is driven by a high-energy ferrite magnet motor. 5.25" Kevlar Midrange Drivers With Aluminum Phase Plug All woofers in the Verus family employ Kevlar cones. With the crossover point starting at about 300 Hz, this exceptionally rigid Kevlar material allows for a warm, clean and dynamic response. This is driven by a high-performance ferrite magnet structure with a vented pole piece to reduce heat build-up and larger T-yoke for increased excursion to increase bass response. The aluminum phase plug and extended voice coil increases power handling to ensure they perform to the max. These midrange "bullet drivers" provide an extraordinary level of detail contributing to the Verus III's full-color palette of sound. 6.5" Kevlar Woofers The dual 6.5" Kevlar woofers provide intense punch with a long-throw linear excursion design. These anchor the bottom end of the 3-way crossover network to provide a tight, clean and accurate low-bass response. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers have also resulted in a cleaner, more open sound in the transition regions. The Verus III employs superior customized components, which include high quality thin film capacitors to prov...
| Brand | Aperion Audio |
| Model | A-Stock Verus V6T 6.5" Tower Speaker Single (Open Box) |
| Drivers | |
| Woofer | Two 6.5" Woven Kevlar Woofers with PVC Dust Cap and Rubber Surrounds |
| Woofer diameter (mm) | 165 |
| Midrange | Two 5.25" Woven Kevlar Mid-range Drivers with Aluminum Phase Plugs |
| Midrange diameter (mm) | 133 |
| Tweeter | 1.1" Custom Aperion ASR Tweeter with ferrofluid |
| Tweeter diameter (mm) | 28 |
| Frequency response | 30 Hz – 35000 Hz +3 −3 dB |
| Enclosure | Ported |
| Sensitivity (dB) | 89 |
| Impedance (Ω) | 4 |
| Recommended amplifier power, least (W) | |
| Recommended amplifier power, most (W) | |
| Built-in amplifier power (W) | |
| Height (mm) | 1105 |
| Width (mm) | 203 |
| Depth (mm) | 305 |
| Weight (kg) | 27 |
Variants
| Finish | Barcode | Part number | |
|---|---|---|---|
| Aperion Audio A-Stock Verus V6T 6.5" Tower Speaker Single (Open Box) V6T-GBP-Y1-a-1 | V6T-GBP-Y1-a-1 | ||
| Aperion Audio A-Stock Verus V6T 6.5" Tower Speaker Single (Open Box) V6T-GBP-Y1-a-2 | V6T-GBP-Y1-a-2 |