Loudspeaker Driver

20 cm (8") full-range speaker with tweeter dome. High efficiency. Suitable for full-range units as vocal or guitar monitors or as a mid-range unit for full-scale or musicians' PA systems.

30 cm (12") woofer with hard cone suspension for keyboard speakers, subwoofers and stage monitors. High efficiency and suitable for sealed and vented systems. High power handling due to magnet vent, capton voice coil carrier and stiff fabric surround.

40 cm (15") woofer with hard cone suspension for P.A. systems, stage monitors and musicians speakers. Solid aluminium die-cast basket for front- or rear baffle mounting. High efficiency and high power handling due to large magnetic drive with vent and 65 mm voice-coil.

Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.). No enclosed cabinet is required. Using the BS 130 - 4 Ohm, this enables the lowest bass frequencies, such as those used for effects in films, to be reproduced in such a way that they are felt through the body rather than heard.

Structure-borne sound converter for midrange- and high frequencies. The units are attached (with screw M5) to a surface which is able to resonate, which causes it to oscillate. No enclosed cabinet is required.Please find further information on exciters here: Basic principles of exciter-technology (PDF; 388 KB)

Structure-borne sound converter for bass frequencies. The units are attached to a surface which is able to resonate, which causes it to oscillate (e.g. a panel of a car body, the base construction of a settee etc.). No enclosed cabinet is required. Using the BSX 130 WP - 4 Ohm, this enables the lowest bass frequencies, such as those used for effects in films, to be reproduced in such a way that they are felt through the body rather than heard.

13 cm (5") low-midrange system with a very strong magnetic drive and mounted in a Euro standard basket. The connection terminals are gold plated 4.8 mm and 6.3 mm soldering lugs. Coloration free midrange and high efficiency. Car specific installation is possible, provided that the mounting depth of the large magnet has been considered.

13 cm (5") low midrange system mounted in a Euro standard basket and with coated paper cone. With strong magnet system and large cone displacement due to elastic rubber surround.

16 cm (6.5") low midrange system mounted in a Euro standard basket and with coated paper cone. With strong magnet system and large cone displacement due to elastic rubber surround.

30 cm (12") subwoofer featuring a coated cone and a solidly constructed metal basket. To provide long cone strokes and high power handling, the driver is equipped with an extended rear pole-plate. Due to the 50 mm voice coil the BZ 300 is suited for high power operation. Suitable for free-air-operation as well as driver for band-pass and vented enclosures.