Loudspeaker

Theatrus T63S On-Wall Speaker | Slim 3-Way Design | Single 6.5" Woofer The new Theatrus T63S On-Wall Speaker joins a growing line of slim on-wall speakers from our highly acclaimed Theatrus Cinema Studio line. Designed and perfected for custom installation, these slim cabinets offer an unobtrusive solution for massive sound staging. All of our Theatrus speakers are loaded with our latest crossover and driver technologies, housed in our stealth black cabinetry, and includes our stealth mounting bracket that makes installation a breeze. The Theatrus T63S On-Wall Speaker is a 3-Way design, featuring an array of three (3) drivers, which fuses into a super force of sound quality that is designed for home theater or custom installation, professional music studios, and film studios. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Haier Ribbon Tweeter, and 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by a 6.5" Woofer which was crafted from German Propex Fabrics Curv material. TheTheatrus T63S On-Wall Speaker offers higher sound pressure levels, suitable for smaller listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed On-wall, In-Wall, on the ground or on the ceiling, the Theatrus line can effectively cover most of the listening area. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speakers for even greater placement flexibility. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 70-35,000 Hz Impedance: 4 Ohms Sensitivity: 91 dB Max SPL: 116 dB Recommended Power: 20-150 Watts Peak Power: 300 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: One German 2" Soft-Dome Fabric Mid-Range Driver Woofer: One German 6.5" Curv® Cone Woofer Driver Configuration: 3-Way Design | 1x 6.5" Woofer | 1x 2" Mid-Range | 1x AMT Tweeter Enclosure Type: Sealed Cabinet, Anti-Resonant, Internally Braced Product Weight: 17.2 Lbs / 7.8 Kgs Product Dimensions: W 8.7" x H 18.1" x D 4.3" Without Grilles W 220mm x H 460mm x D 110mm Without Grilles Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 22 Lbs / 10 Kgs Shipping Dimensions: L 13" x W 11" x H 24" L 335mm x W 275mm x H 605mm Features Aperion Air Motion Tweeter The APERION AMT tweeter features a sensitivity of up to 103 dB and a frequency response extending to 40 kHz, allowing for efficient sound conversion and a wide sound range. Utilizing AMT technology, it delivers high-fidelity sound without compression, ideal for high-quality audio enthusiasts. The pneumatic tweeter produces vibrant high-frequency effects, perfect for string instruments and classical music. Its excellent horizontal diffusion expands the listening range, making it suitable for large and medium-sized home theater rooms. 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. This midrange driver is commonly used in high-end monitors and audiophile speakers and is renowned for its unique design and exceptional sound quality. It provides excellent off-axis response and low distortion, delivering a warm, whole midrange tone. Additionally, it enhances sound diffusion and directivity, ensuring even distribution and reducing standing waves and reflections for a more natural listening experience. 6.5" Curv Woofer The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewoun...

Theatrus T63W In-Wall Speaker | 3-Way Single 6.5" Cinema/Studio The T63W In-Wall speaker is a versatile speaker that provides powerful sound, making it a great choice for home theaters, recording studios, and various professional settings. Its sturdy design ensures durability and easy setup. The speaker looks stylish thanks to its strong steel casing, and you can use it with or without a magnetic front cover to choose between a bold or more understated look. The Aperion Theatrus In-Wall with backing enclosure has been designed and engineered with the same high expectations as the other Theatrus models for easy-installation, leaving no space for compromise on sound or build quality. Its hardened steel baffle maintains a clean look if you prefer no grilles, or leave the grilles on for a stealth-like look throughout your home theater. The T63W In-Wall speaker is a high SPL speaker with excellent performance and dynamic range, targeting small to large home theaters. No matter where you install your Theatrus speakers, you'll know you're getting the best that Aperion has to offer. The T63W In-Wall is a 3-Way designed Speaker, featuring an array of three (3) drivers, which fuses into a superforce of sound quality that is designed for home theater, custom installation, professional music studios, and film studios. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Ribbon Tweeter, and one 2-inch Soft-Dome Mid-Range Driver is housed in a custom designed aluminum faceplate. Enhanced low end is produced by one 6.5" Woofer which were crafted from German Propex Fabrics Curv material. The T63W In-Wall Speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms, the Theatrus line can effectively cover most of the listening area. The speakers can be arranged vertically or horizontally, dependent on the application. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speaker for even greater placement flexibility. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 70-35,000 Hz Impedance: 4 Ohms Sensitivity: 91 dB Max SPL: 116 dB Recommended Power: 20-150 Watts Peak Power: 300 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: One German 2" Soft-Dome Fabric Mid-Range Driver Woofer: One German 6.5" Curv® Cone Woofer Driver Configuration: 3-Way Single 6.5" Backbox In-Wall Speaker Enclosure Type: Anti-Resonant, Sealed Product Weight: 20.5 Lbs / 9.3 Kg Product Dimensions: W 10.2 x H 19.7" x D 4.4" W 260mm x H 500mm x D 112mm Cut-out Dimensions: H 18.35" x W 8.9" x D 4.4" H 466mm x W 226mm x D 110mm Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 24 Lbs / 10.9 Kgs Shipping Dimensions: H 24" x W 11" x D 13" H 605mm x W 280mm x D 338mm Features Aperion Air Motion Tweeter The AMT tweeter can achieve 103 dB sensitivity, and frequency response of up to 40 kHz, which we found to be perfect for both larger and medium sized home theater rooms. Knowing that this tweeter would operate at a higher SPL, we also added a protection circuit to help keep the tweeter safe. 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. 6.5" Curv Woofer The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and ...

Theatrus T65 Passive Monitor Speaker | 3-Way Dual 6.5" Cinema / Studio Speaker The T65 Monitor Speaker from Theatrus are designed specifically for home theaters, making them perfect for use as front and center speakers. These speakers deliver clear and powerful sound, giving you an incredibly realistic movie-watching experience. They also perform well for music and concerts thanks to their high-quality components and design. To ensure a consistent sound throughout your space, you can even use these speakers in the surround sound setup. The T65 Monitor Speaker is a 3-Way design, featuring an array of five (5) drivers, which fuses into a super force of sound quality that is designed for home theater, custom installation, professional music studios, and film studios. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion designed and engineered AMT Ribbon Tweeter, and Dual 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by Dual 6.5" Woofers which were crafted from German Propex Fabrics Curv material. The T65 Monitor Speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed On-wall, or on a stand, the Theatrus line can effectively cover most of the listening area. The speakers can be arranged vertically or horizontally, dependent on the application. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speaker for even greater placement flexibility. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 35-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 121 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: One Aperion AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 6.5" Curv® Cone Woofers Driver Configuration: 3-Way Five Drivers Enclosure Type: Ported w/ Optional Port Plugs, Anti-Resonant, Internally Braced Product Weight: 33 Lbs / 15 Kgs Product Dimensions: W 14.2" x H 16.9" x D 8.7" W 360mm x H 430mm x D 220mm (Without Grilles) Placement Location: Main Speakers (Left, Center, Right) Shipping Weight: 39.7 Lbs / 18 Kgs Shipping Dimensions: W 20" x H 23.6" x D 15.5" W 505mm x H 600mm x D 395mm Features Aperion Air Motion Tweeter The APERION AMT tweeter boasts a sensitivity of 103 dB and a frequency response reaching 40 kHz, making it ideal for larger and medium-sized home theater rooms. To ensure the tweeter's safety while operating at higher sound pressure levels, we have included a protection circuit. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. Dual 6.5" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in creating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and enjoyment. In our pursuit of excellence, we have also custom-painted the FR4 2OZ PCB in Aperion's signature red to reflect our commitment to delivering outstanding sound quality! High-Fidelity Cinema Sound Quality When listening to music, the high-frequency performance is outstanding, with solid density and an abundance of detail. The low frequencies are quick and distinct, showcasing impressive layering. In a multi-channel cinema setup, the characteristics of the monitor box's image cohesion shine through. There is minimal interference between channels, and the...

Theatrus T65S On-Wall Speaker | Slim 3-Way Dual 6.5" Woofers The T80S Slim and T65S On-Wall Speaker are two great speakers designed for creating a surround sound experience. They share the same advanced technology and speaker setup as other models, but they are designed to be as slim as possible. This makes them perfect for mounting on walls or installing in built-in spaces. Don’t overlook these slim models though; they also perform exceptionally well as front and center speakers in your sound system. The T65S On-Wall Speaker is a 3-Way design, featuring an array of five (5) drivers, which fuses into a super force of sound quality that is designed for home theater or custom installation, professional music studios, or film studios. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Ribbon Tweeter, and Dual 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by Dual 6.5" Woofers which were crafted from German Propex Fabrics Curv material. The T65S On-Wall speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed On-wall, In-Wall, or on the ceiling, the Theatrus line can effectively cover most of the listening area. The speakers can be arranged vertically or horizontally, dependent on the application. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speaker for even greater placement flexibility. Whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 65-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 121 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 6.5" Curv® Cone Woofers Driver Configuration: 3-Way Five Drivers Enclosure Type: Sealed Cabinet, Anti-Resonant, Internally Braced Product Weight: 26.5 Lbs / 12 Kgs Product Dimensions: W 14.2" x H 17" x D 4.3" W 360mm x H 430mm x D 110mm (Without Grilles) Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 33 Lbs / 15 Kgs Shipping Dimensions: (W/H/D) W 19"I x H 23" x D 11" W 485mm x H 580mm x D 275mm Features Aperion Air Motion Tweeter The APERION AMT tweeter boasts a sensitivity of 103 dB and a frequency response reaching 40 kHz, making it ideal for larger and medium-sized home theater rooms. To ensure the tweeter's safety while operating at higher sound pressure levels, we have included a protection circuit. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. Dual 6.5" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and enjoyment. In our pursuit of excellence, we have also custom-painted the FR4 2OZ PCB in Aperion's signature red to reflect our commitment to delivering outstanding sound quality! High-Fidelity Cinema Sound Quality When listening to music, the high-frequency performance is outstanding, with solid density and an abundance of detail. The low frequencies are quick and distinct, showcasing impressive layering. In a multi-channel cinema setup, the characteristics of the monitor box's image cohesion shine through. There is minimal interference between channels, and the sound field positi...

Theatrus T65SL On-Wall Speaker | Dual 6.5" Woofer | LCR + Surround Sound When Aperion Audio began developing the Theatrus series five years ago, we focused on a key challenge: how to create thinner, more compact speakers while maintaining excellent sound quality. Our goal was to make the Theatrus speakers versatile for various applications and to enhance their ability to blend seamlessly into different environments. Our primary objective was to engineer slimmer speakers capable of delivering exceptional sound quality. Additionally, we emphasized the importance of aesthetic appeal, ensuring that the Theatrus T65SL On-Wall Speaker could effectively blend into their surroundings for improved concealment, all while providing an immersive audio experience that meets the diverse needs of our customers. The decoration style of private custom home theaters is increasingly focused on creating an unobtrusive and streamlined environment. Designers prioritize the concealment of external devices, such as speakers, projectors, and wiring, to achieve a clean and sophisticated aesthetic. This trend enhances the home theater's visual appeal and maximizes usable space, contributing to a more immersive viewing experience. By integrating technology seamlessly into the design, homeowners can enjoy a captivating atmosphere without the distraction of bulky equipment. This approach emphasizes simplicity, elegance, and functionality in home theater spaces. Since the launch of the current Theatrus models, they have received widespread acclaim from users. However, our end users and distributors have expressed additional expectations during actual use, mainly when dealing with narrow spaces. We are delighted to introduce the new "Slim Stack On-Wall" series of Theatrus speakers. These speakers can blend into your home theater, making them almost invisible. They provide fantastic sound without any distractions. The Theatrus T65SL On-Wall Speaker is ideal for front left, right, and center, as well as surround, but can be used in any position in the home theater system for a detailed and immersive sound stage. Specification Frequency Response: (+/- 3dB) 65-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 121 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Driver Woofer: Two German 6.5" Curv® Cone Woofer Driver Configuration: 3-Way Design | Dual 6.5" Woofer | 1x 2" Mid Range | 1x AMT Tweeter Enclosure Type: Anti-Resonant, Sealed Product Weight: 28.7 Lbs / 13 Kg Product Dimensions: H 30.7" x W 8.7" x D 4.3" Without Grilles H 780 x W 220 x D 110mm Without Grilles Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 37 Lbs / 17 Kgs Shipping Dimensions: L 13" x W 11" x H 36" L 335mm x W 275mm x H 920mm Features Aperion Air Motion Tweeter The APERION AMT tweeter features a sensitivity of up to 103 dB and a frequency response extending to 40 kHz, allowing for efficient sound conversion and a wide sound range. Utilizing AMT technology, it delivers high-fidelity sound without compression, ideal for high-quality audio enthusiasts. The pneumatic tweeter produces vibrant high-frequency effects, perfect for string instruments and classical music. Its excellent horizontal diffusion expands the listening range, making it suitable for large and medium-sized home theater rooms. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. This midrange driver is commonly used in high-end monitors and audiophile speakers and is renowned for its unique design and exceptional sound quality. It provides excellent off-axis response and low distortion, delivering a warm, whole midrange tone. Additionally, it enhances sound diffusion and directivity, ensuring even distribution and reducing standing waves and reflections for a more natural listening experience. Dual 6.5" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinem...

Theatrus T65W In-Wall Speaker | 3-Way Dual 6.5" Woofers The T65W In-Wall Speaker represents a premier high-SPL cinema speaker designed for in-wall installation, demonstrating exceptional performance in both small and large home theaters, professional recording studios, and commercial environments. Its meticulous design and outstanding technical features yield superior sound quality while facilitating straightforward installation. The enclosure is constructed from hardened steel, providing the speaker with a sleek, modern aesthetic, which remains appealing whether the magnetic grille is utilized or removed for a more understated look. The Aperion Theatrus T65W In-Wall speaker has been designed and engineered with the same high expectations as the other Theatrus models for easy-installation, leaving no space for compromise on sound or build quality. Its hardened steel baffle maintains a clean look if you prefer no grilles, or leave the grilles on for a stealth-like look throughout your home theater. The T65W In-Wall Speaker is a 3-Way design, featuring an array of five (5) drivers, which fuses into a super force of sound quality that is designed for a wide use case. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Ribbon Tweeter, and Dual 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by Dual 6.5" Woofers which were crafted from German Propex Fabrics Curv material. The T65W In-Wall Speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed In-Wall, the Theatrus line can effectively cover most of the listening area. The speakers can be arranged vertically or horizontally, dependent on the application. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 65-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 121 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 6.5" Curv® Cone Woofers Driver Configuration: 3-Way Dual 6.5" Backbox In-Wall Speaker Enclosure Type: Anti-Resonant, Sealed Product Weight: 31.3 Lbs / 14.2 Kgs Product Dimensions: H 18.5" x W 15.8" x D 4.4" H 470mm x W 400mm x D 112mm Cut-out Dimensions: H 17.17" x W 14.41" x D 4.3" H 436mm x W 366mm x D 110mm Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 36.6 Lbs / 16.6 Kgs Shipping Dimensions: H 23" x W 11" x D 19" H 580mm x W 280mm x D 475mm Features Aperion Air Motion Tweeter The APERION AMT tweeter boasts a sensitivity of 103 dB and a frequency response reaching 40 kHz, making it ideal for larger and medium-sized home theater rooms. To ensure the tweeter's safety while operating at higher sound pressure levels, we have included a protection circuit. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. Dual 6.5" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and enjoyment. In our pursuit of excellence, we have also custom-painted the FR4 2OZ PCB in Aperion's signature red to reflect our commitment to delivering outstanding sound quality! High-Fidelity Cinema Sound Quality When listening to music, the high-frequency perf...

Theatrus T65WL In-Wall Speaker - Dual 6.5" Woofers - LCR Speaker When Aperion Audio began developing the Theatrus series five years ago, we focused on a key challenge: how to create thinner, more compact speakers while maintaining excellent sound quality. Our goal was to make the Theatrus speakers versatile for various applications and to enhance their ability to blend seamlessly into different environments. Our primary objective was to engineer slimmer speakers capable of delivering exceptional sound quality. Additionally, we emphasized the importance of aesthetic appeal, ensuring that the Theatrus speakers could effectively blend into their surroundings for improved concealment, all while providing an immersive audio experience that meets the diverse needs of our customers. The decoration style of private custom home theaters is increasingly focused on creating an unobtrusive and streamlined environment. Designers prioritize the concealment of external devices, such as speakers, projectors, and wiring, to achieve a clean and sophisticated aesthetic. This trend enhances the home theater's visual appeal and maximizes usable space, contributing to a more immersive viewing experience. By integrating technology seamlessly into the design, homeowners can enjoy a captivating atmosphere without the distraction of bulky equipment. This approach emphasizes simplicity, elegance, and functionality in home theater spaces. Since the launch of the current Theatrus T65WL In-Wall Speaker, they have received widespread acclaim from users. However, our end users and distributors have expressed additional expectations during actual use, mainly when dealing with narrow spaces We are delighted to introduce the new "Slim Stack In-Wall" series of Theatrus speakers. These speakers can blend into your home theater, making them almost invisible. They provide fantastic movie sound without any distractions. This long, rectangular cabinet accommodates placement between standard 16" stud spacing. The Theatrus T65WL In-Wall Speaker is ideal for front left, right, and center, as well as surround, but can be used in any position in the home theater system for a detailed and immersive sound stage. Specification Frequency Response: (+/- 3dB) 65-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 121 dB Recommended Power: 20-250 Watts Peak Power: 500 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 6.5" Curv® Cone Woofers Driver Configuration: 3-Way Design | Dual 6.5" Woofers | 2" Mid-Range | 1x AMT Tweeter Enclosure Type: Anti-Resonant, Sealed Product Weight: 34.6 Lbs / 15.7 Kg Product Dimensions: H 32.3" x W 10.2" x D 4.4" H 820mm x W 260mm x D 112mm with no grille Cut-out Dimensions: L 30.94" x W 8.9" L 786mm x W 226mm Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 42 Lbs / 19 Kgs Shipping Dimensions: L 13" x W 11" x H 36" L 330mm x W 280mm x H 920mm Features Aperion Air Motion Tweeter The APERION AMT tweeter features a sensitivity of up to 103 dB and a frequency response extending to 40 kHz, allowing for efficient sound conversion and a wide sound range. Utilizing AMT technology, it delivers high-fidelity sound without compression, ideal for high-quality audio enthusiasts. The pneumatic tweeter produces vibrant high-frequency effects, perfect for string instruments and classical music. Its excellent horizontal diffusion expands the listening range, making it suitable for large and medium-sized home theater rooms. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. This midrange driver is commonly used in high-end monitors and audiophile speakers and is renowned for its unique design and exceptional sound quality. It provides excellent off-axis response and low distortion, delivering a warm, whole midrange tone. Additionally, it enhances sound diffusion and directivity, ensuring even distribution and reducing standing waves and reflections for a more natural listening experience. Dual 6.5" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between ...

Theatrus T6C In-Ceiling Speaker | 6.5" Woofer | AMT Tweeter | Aluminum Frame We created ceiling speakers specifically for the Theatrus series in response to the demands of our customers, so let me introduce the Theatrus T6C In-Ceiling Speaker. These users desire a premium line of ceiling speakers that seamlessly integrates with other offerings in the Theatrus collection. They emphasize the importance of achieving perfect consistency in the attributes and materials of the tweeter and woofer of Theatrus line. This led to the development of our Theatrus T6C in-ceiling speaker and T8C in-ceiling speakers. -Our team in Portland is ready to help you find the right gear. Enjoy free shipping, a 30-day home trial with quick delivery, lifetime support, a 5-year warranty, and over 26 years of excellent customer service with a 5-star rating! The T6C In-Ceiling speaker is a powerful and versatile unit designed for custom installation within multi-channel home theater sound systems. Its robust capabilities, combined with flexible installation options and various adjustment techniques, make it an outstanding choice for establishing panoramic height and surround channels. The T6C features an open two-way design without a cabinet, showcasing a coaxially arranged tweeter and woofer at the front, while the rear houses a crossover circuit and binding posts, presenting a simple yet elegant configuration. It incorporates our AMT Ribbon tweeter alongside a 165 mm (6.5 inch) long-stroke mid-woofer constructed from Curv Cone composite material, which is both lightweight and durable. This design ensures exceptional transient response, high efficiency, and the ability to handle substantial power, resulting in a sound that is both delicate and precise. The Theatrus T6C in-ceiling speaker offers exceptional sound quality for audiophiles in a sleek, ceiling-mounted design. It is perfect for use as height speakers in Dolby Atmos, DTS-X immersive and Dolby Atmosphere audio setups. The speakers in the Theatrus series are meticulously matched in timbre to ensure seamless integration and a unified audio experience in both stereo and surround sound installations. When combined with a top-notch amplifier our Theatrus speakers provides distortion-free, immersive sound with remarkable clarity. Specification Frequency Response: (+/-3 dB)45HZ-35KHZ Impedance: 4 Ohms Sensitivity: 90 dB Recommended Power: 20-120 Watts Peak Power: 240 Watts Tweeter: APERION AMT Ribbon Tweeter Woofer: APERION 6.5" Curv® Cone Woofer Driver Configuration: 2-Way Enclosure Type: Infinite Baffle Design Product Weight: 7.1 Lbs/3.2 Kgs Product Dimensions: 9.4"/239 mm Diameter X 4.6"/117 mm Deep(Includes Metal Grille) Cut-out Dimensions: 8.19"/208 mm Round Finish: Fireproofing Black Aluminum Frame, Black Paintable Grille Placement Location: In-Ceiling Shipping Weight: 8.2 Lbs / 3.7 Kg each Shipping Dimensions: 11"x11"x7.3"/280x280x185mm (LxWxH) Features: Aperion AMT Ribbon Tweeter The Air Motion Transformer tweeter boasts a 90% reduction in excursion requirement when compared to a typical dome tweeter, resulting in improved agility and accuracy. This translates to a responsive, nuanced, and distortion-free sound experience. Additionally, Air Motion Transformer tweeters provide a wide horizontal dispersion and a tightly controlled vertical dispersion, ensuring an optimized listening area. 6.5" Long-Throw Curv® Cone Woofer Quality sound is rooted in superior drivers. The Theatrus line incorporates an innovative Curv material developed by the German firm, Propex Fabrics. This advanced Curv material is not only lightweight but also exhibits remarkable rigidity and strength, along with exceptional durability and resistance to temperature and moisture. Notably, it possesses a high Young's Modulus and excellent internal damping properties. The collaboration between the woofer and tweeter ensures the delivery of outstanding integrated sound details, boasting a frequency response range of 45Hz to 35kHz Durable Aluminum Frame T6C uses a high-quality all-aluminum frame, which is flame-retardant and adaptable, waterproof, moisture-proof, and beautiful, making it suitable for use in more extreme environments. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The Theatrus employs superior customized components, which include high-quality thin film capacitors to provide minimum dielectric loss, customized Aperion internal wiring with spade connectors to make upgrading a breeze, and we even went as far as customizing the PCB board with an Aperion red color to represent our love of great sounding audio! +/- 2 dB Treble Equalization Jumper Al...

Aperion 3-Way Dual 8" Cinema/Studio Monitor Theatrus T80 Speaker The Theatrus T80 Speaker LCR and T65 LCR loudspeakers from our Theatrus line are designed specifically for home theaters, making them perfect for use as front and center speakers. These speakers deliver clear and powerful sound, giving you an incredibly realistic movie-watching experience. They also perform well for music and concerts thanks to their high-quality components and careful design. To ensure a consistent sound throughout your space, you can even use these speakers in the surround sound setup. The Theatrus T80 Speaker is a 3-Way design, featuring an array of five (5) drivers, which fuses into a super force of sound quality that is designed for home theater, custom installation, professional music studios, and film studios. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Haier Ribbon Tweeter, and Dual 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by the Dual 8" Woofers which were crafted from German Propex Fabrics Curv material. The Theatrus T80 Speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed On-wall, In-Wall, on the ground or on the ceiling, the Theatrus line can effectively cover most of the listening area. The Theatrus T80 Speaker can be arranged vertically or horizontally, dependent on the application. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speaker for even greater placement flexibility. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 30-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 122 dB Recommended Power: 20-350 Watts Peak Power: 700 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 8" Curv® Cone Woofers Driver Configuration: 3-Way Five Drivers Enclosure Type: Ported w/ Optional Port Plugs, Anti-Resonant, Internally Braced Product Weight: 47 lbs/ 21.3 Kgs Product Dimensions: W 15.8" x H 19.7" x D 11.8" W 400mm x H 500mm x D 300mm (Without Grilles) Placement Location: Main Speakers (Left, Center, Right) Shipping Weight: 56.2 Lbs / 25.5 Kgs Shipping Dimensions: W 21" x H 26" x D 19" W 535mm x H 670mm x D 480mm Features Aperion Air Motion Tweeter The APERION AMT tweeter boasts a sensitivity of 103 dB and a frequency response reaching 40 kHz, making it ideal for larger and medium-sized home theater rooms. To ensure the tweeter's safety while operating at higher sound pressure levels, we have included a protection circuit. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. Dual 8" Curv Woofers The Theaterus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and enjoyment. In our pursuit of excellence, we have also custom-painted the FR4 2OZ PCB in Aperion's signature red to reflect our commitment to delivering outstanding sound quality! High-Fidelity Cinema Sound Quality When listening to music, the high-frequency performance is outstanding, with solid density and an abundance of detail. The low frequencies are quick and distinct, showcasing impressive layering. In a multi-channel cinema setup, the characteristics of the monitor box's image cohesion shine thro...

Theatrus T80S Slim On-Wall Speaker | 3-Way Dual 8" Cinema / Studio Monitor The T80S Slim On-Wall Speaker and T65S Slim On-Wall Speaker are two great speakers designed for creating a surround sound experience. They share the same advanced technology and speaker setup as other models, but they are designed to be as slim as possible. This makes them perfect for mounting on walls or installing in built-in spaces. Don’t overlook these slim models though; they also perform exceptionally well as front and center speakers in your sound system. The T80S Slim On-Wall Speaker has a 3-Way design, featuring an array of five (5) drivers, which fuses into a super force of sound quality that is designed for home theaters enthusiasts. It's not all about sound though, the speaker has a clean and smooth appearance. The Aperion crafted AMT Ribbon Tweeter, and Dual 2-inch Soft-Dome Mid-Range Drivers are housed in a custom designed aluminum faceplate. Enhanced low end is produced by the Dual 8" Woofers which were crafted from German Propex Fabrics Curv material. The T80S Slim On-Wall Speaker offers higher sound pressure levels, suitable for larger listening environments. High-Efficiency plus High-Power makes for an explosively wide sound field. Theatrus speakers are extremely flexible for placement for even the most difficult of rooms. Placed On-wall, In-Wall, on the ground or on the ceiling, the Theatrus line can effectively cover most of the listening area. The speakers can be arranged vertically or horizontally, dependent on the application. Along with the integrated mounting inserts are two frequency tuning switch options on the rear of the speaker for even greater placement flexibility. So whether you choose to use the Theatrus speakers in a 2-channel music setup, or a full blown home theater with Dolby Atmos, DTS:X and Auro-3D, listening to the new Theatrus speakers will certainly impress the most discerning of ears. Specification Frequency Response: (+/- 3dB) 60-35,000 Hz Impedance: 4 Ohms Sensitivity: 94 dB Max SPL: 122 dB Recommended Power: 20-350 Watts Peak Power: 700 Watts Tweeter: One AMT (Air Motion Transformer) Tweeter Midrange: Two German 2" Soft-Dome Fabric Mid-Range Drivers Woofer: Two German 8" Curv® Cone Woofers Driver Configuration: 3-Way Five Drivers Enclosure Type: Sealed Cabinet, Anti-Resonant, Internally Braced Product Weight: 35.7 Lbs / 16.2 Kgs Product Dimensions: W 15.8" x H 19.7" x D 5.1" W 400mm x H 500mm x D 130mm (Without Grilles) Placement Location: Main Speakers (Left, Center, Right), or Rear/Side Surround Speakers Shipping Weight: 42.8 Lbs / 19.4 Kgs Shipping Dimensions: W 20.5" x H 25.4" x D 11.6" W 520mm x H 645mm x D 295mm Features Aperion Air Motion Tweeter The APERION AMT tweeter boasts a sensitivity of 103 dB and a frequency response reaching 40 kHz, making it ideal for larger and medium-sized home theater rooms. To ensure the tweeter's safety while operating at higher sound pressure levels, we have included a protection circuit. Dual 2" Soft-dome Midrange Driver Our high end soft-dome midrange unit features a large, low distortion 50mm voice coil, which exceeds the normal size of this type of drive unit. It's wide pole structure and special damping coating significantly reduce the medium frequency segmentation vibration. Dual 8" Curv Woofers The Theatrus line features a new Curv material from Germany Propex Fabrics. The properties of this new Curv material are lightweight, yet rigid and stiff, maintain a high temperature resistance without any water absorption, and the most important in crating a driver unit - this material has a high Young's Modulus and internal damping. Advanced Crossover Time-intensive iterative designing and fine-tuning of the crossover networks have resulted in a smoother, more neutral, and better-balanced frequency response across the whole range. Enhanced phase integration between the tweeter and midrange drivers has also resulted in a cleaner, more open sound in the transition regions. The speakers of Theatrus Cinema Studio are crafted using high-quality custom components. These include Aperion's premium metallized polypropylene capacitors, copper wire inductors, and precision wirewound resistors. Together, these components create an exceptional audio experience that combines both beauty and enjoyment. In our pursuit of excellence, we have also custom-painted the FR4 2OZ PCB in Aperion's signature red to reflect our commitment to delivering outstanding sound quality! High-Fidelity Cinema Sound Quality When listening to music, the high-frequency performance is outstanding, with solid density and an abundance of detail. The low frequencies are quick and distinct, showcasing impressive layering. In a multi-channel cinema setup, the characteristics of the monitor box's image cohesion shine through. There is minimal interference between channels, and the soun...